printed circuit dip solder connector www.vishay.com for technical questions, contact: connectors@vishay.com document number: 36024 1 revision: 21-mar-07 series 303 vishay dale applications for use in equipment requiring printed circuit connectors of the dip solder type with mating female connector. electrical specifications current rating: 3 a breakdown voltage, contact to contact and contact to ground: at sea level: 1200 v rms at 70 000 feet: 325 v rms features ? guide pins polarize connectors and aid in alignment ? mounting studs provide easy, vibration-resistant mounting to circuit board ? male contacts molded in. female contacts float which aids in alignment and enables connectors to withstand vibration ? long, thin, three-row design requires a minimum of space ? meets applicable paragraphs of mil-c-8384 material specifications contact: phosphor bronze, gold plated studs, guides, washersm nuts: corrosion-resistant steel, passivated standard body: glass-filled diallyl phthalate per mil-p-19833, type gdi-30 green physical specifications number of contacts: 45 minimum creepage between contacts: 0.06" minimum air space between contacts: 0.02" contacts, center to center: 0.050" temperature range: operating and non-operating; - 62 c to + 125 c dimensions in inches (millimeters) a b c d e f h j k l m n p r s t u v w x y a a b c d e f h j k m n p r s t u v w x y z 1 2 303s45 303s45 v ishay date code 0.275 [6.9 8 ] (typ.) (typ.) 0.275 [6.9 8 ] 2.90 [73.7] 0.050 [1.27] (typ.) 0.200 [5.0 8 ] 2.200 [55.9] 2.600 0.00 8 [66.00 0.20] 0.150 [3. 8 1] 0.050 [1.27] 0.1 8 0 [4.57] 0.36 [9.14] 0.06 [1.52] r. (typ.) 0.100 [2.54] 0.100 [2.54] 0.03 8 [0.965] 0.156 [3.96] (typ.) (typ.) 0.047 [1.19] (typ.) 0.093 .010 [2.36 0.25] 0.360 [9.14] 0.25 [6.35] 0.01 8 [0.3 8 1] 0.012 [0.305] 0.1 8 7 0.010 [4.75 0.25] guide socket to accept ? 0.093 [2.36] pi n (typ.) split lock washer (typ.) hex n ut (typ.) 4-40 u n c 2a (typ.) "c" ri n g (typ.) socket co n tact solder cup ? 0.035 0.002 [0. 88 9 0.051] x 0.12 [3.05] dp. (typ.)
www.vishay.com for technical questions, contact: connectors@vishay.com document number: 36024 2 revision: 21-mar-07 series 303 vishay dale printed circuit dip solder connector dimensions in inches (millimeters) ad hl k n s mr pt u v y x wz a b c d e f h j k m n p r s t u v w z [2.36] 1 8 " date code 0.100 0.100 0.02 8 0.001 [0.711 0.025] 0.050 typ. 0.100 0.100 0.240 0.00 8 0.2 8 0 [7.11] 0.0300 0.0005 dia. ref. 0.102 0.010 [2.54] [2.54] 2.90 [73.7] dia. typ. [1.27] 0.050 [1.27] 1. 8 0 [4.57] 0.360 [9.14] 0.200 [5.0 8 ] 2.200 [55.9] 2.600 0.00 8 [66.0 0.203] 0.140 [3.56] 0.150 [3. 8 1] 0.06 r. typ. [1.52] [2.54] [2.54] [6.10 0.203] 0.1 8 7 0.010 [4.75 0.254] co n tact pi n [0.762 0.013] guide pi n typ. [0.254] [2.59] 0.21 8 typ. [5.54] 0.110 0.003 typ. [2.79 0.076] 0.093 dia. typ. 0.165 0.002 dia. typ. [4.19 0.051] flat washer typ. hex. n ut typ. 2-56 u n c-2a mou n ti n g stud typ. 303pr45 v ishay ordering information 303 pr -45 model contacts number of contacts pr = pin with right angl e dip solder terminals s = socket
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
